What Is An Ac Adapter On A Laptop - Phần mềm gốc | Phần mềm số 1 tại Việt nam

AC adapters convert a higher-voltage alternating current to a lower-voltage direct current for use with devices that require a relatively constant voltage (within a tolerance). Direct current is also required to recharge batteries, making AC adapters essential for electronic devices like laptops (see Figure 1) and cell phones.[1] Older AC adapters waste quite a bit of electricity in the form of standby power, but recent regulations and subsequent innovations have reduced the amount of electricity wasted considerably. See Standby power for more detailed information.

May Be of Interest to You

How it works

A simple AC adapter consists of a transformer, a rectifier, and an electronic filter. The transformer initially converts a relatively high-voltage alternating current that is supplied by an electrical outlet to a lower voltage suitable for the device being powered.[2][3] A rectifier then converts alternating current into direct current. There are two separate types of rectifiers: the half-wave rectifier and the full-wave rectifier.

You are watching: What Is An Ac Adapter On A Laptop

Half-wave rectifier

The half-wave rectifier effectively blocks current flow in one direction through the use of a diode (see figure 2). This creates a pulsating direct current. Due to half of the current being blocked, much of the supplied energy is lost, and the mean voltage of half-wave rectified power is lower than that of full-wave rectified power.

Full-wave rectifier

See more : How Much Ram Can A Laptop Have

There are several types of full-wave rectifiers. Rather than blocking the electric current in one direction, these rectifiers flip its direction so that a constant pulsing direct current is the output. A common type of full-wave rectifier is the full-wave bridge rectifier[5] (See Figure 3).

Further Reference: How To Add Google To Home Screen On Laptop

For more information about rectifiers, visit ElectronsTutorials or All About Circuits.

Smoothing

As seen in Figures 2 and 3, the output voltage of the two rectifiers still varies greatly. However, a constant voltage is required for most devices that operate on direct current. A smoothing circuit or capacitor is used to achieve this. At its simplest, a circuit component known as a reservoir capacitor or smoothing capacitor is placed at the output of the rectifier. Essentially it releases stored energy when no voltage is being output from the rectifier.[7] This creates a fairly steady voltage. However, some ripples from the AC voltage remain (See Figure 4).

Modern AC adapters

See more : How To Stop Laptop From Sleeping

In modern use the most common adapter is the Switched Mode Power Supply (SMPS). These are considerably more complex than linear regulated power supplies and have clear advantages. The main advantage for SMPS is that it gives DC supplies that can deliver more power for a given size, cost and weight of the adapter.[8]

SMPS is used in many applications such as battery chargers, laptops, vehicles, LED lighting, and other consumer electronics. To learn more about how SMPS units work, visit Learn about Electronics.